Description
2 units per box
48810-0K010 / STABILIZER LINK / VIGO – FORTUNER 2005-2015 / REVO – FORTUNER 2015-2019
The stabilizer link comprises a rigid compression element, formed by two ball joints, located at each end, threaded, movements in all directions. These assistants are active throughout the entire steering course, assisting with coupling the stabilized bar to the entire suspension assembly. Its mission is to decrease and improve the movement of the vehicle.
USUAL WEAR AND WHEN TO CHANGE THE STABILIZING CONNECTOR:
The stabilizer link can have damage caused by the time or use of the vehicle, corrosion, insertion of dirt or adverse particles in its joints, which can be derived from possible defects in the rubber of the ends of the same. As well as breakdowns caused by force majeure such as accidents that the vehicle may have.
It is important after a certain use of the vehicle to verify against the manual established by the manufacturer and verify the state of the same according to the vehicle model or the mileage affected. It is recommended to check if it is fixed in position and if there are no deformations. When proceeding with the change of this article, it could be useful to do this with the two connecting rods affected to the car.
English 
Español